Roll-Cut

Roll-Cut

The roll cleaning device is composed by a rechargeable lithium-ion battery mechanism with a blade holder with its housing mounted at its end. This housing has been especially conceived to cut multiple layers of paper without damaging the lower layer, which remains intact, with a clear cut at the head of the roll.

The particular configuration of the housing of the blade allows working in total accordance with European health and safety rules.

The device can also have an additional piece, which allows removing the final layers of material from the core of the finished rolls and it is designed to be easily used by both right and left-handed technicians.

How to use it

For a correct use of the device, a shaped tip must be fixed inside the turns on the side of the roll. This must be performed carefully selecting the height of the material, which must not exceed the allowed cutting amount. Once this parameter is set, start the blade and move the device on one side to perform the cut of the front part of the material.

It is preferable to do more cuts with a lower amount of material in order to avoid battery overload.

When the device is employed to clean the expired cores of the rolls, it can be used to tear the major quantity of paper leaving the removal of the last spirals of paper to a special device, included in the supply, to be pushed between the core and the paper to tear the remaining material.

A backup battery is also available; to guarantee the best possible functioning it is recommended to often switch the battery in use with the recharged backup battery, in order to have the maximum power availability.

Technical Specifications

Battery Voltage220 V for Italy
Frequency50 HZ for Italy
Diameter of the blade80 mm
Cutting material4 mm
N° of blade revolutions3343 RPM
Battery Pack 10.8 V and 1.5 AH Li-ion
Battery Charger 10.8 V Li-ion

Material Kit

The cutting device comes with the following components:

  • Cutting device with rechargeable battery;
  • Backup battery to be kept in charge when the other is in use;
  • Battery charger;
  • Series of 5 blades;
  • Core cleaning device;
  • Kit box;
  • Instruction sheet.

For information about CRC services